SmartHome apps
09-02-2023
De firmware van de Homematic IP raam- en deursensor is geüpdatet naar versie 1.18.6. Deze update bevat een bugfix die het stroomverbruik omlaag brengt als de behuizing van de sensor geopend is, zodat de batterijen langer meegaan en het langer duurt voordat de batterijen leeg raken. De changelog bevat alle informatie van de huidige en eerdere firmware updates. De update wordt spoedig beschikbaar via de Homematic IP app, voor gebruikers van het Homematic IP Access Point. Voor gebruikers van de CCU3 wordt de update zichtbaar via de Homepage van de WebUI.
Gerelateerd product:
C H A N G E L O G
-----------------
Please note: Only use the firmware file in connection with the current software-version of the CCUx!
Device: HmIP-SWDO-2 - Homematic IP Window / Door Contact – optical
Company: eQ-3, Maiburger Str. 29, 26789 Leer, Germany
Version 1.18.6 2022-09-12
--------------------------------------------------------------
** New Feature
* Hotfix for high current consumption with open housing.
Version 1.18.4 2022-06-28
--------------------------------------------------------------
** New Feature
* Add parameter CYCLIC_BIDI_INFO_MSG_DISCARD
* enable CYCLIC_BIDI_INFO_MSG_DISCARD parameter for all devices
* default value is 30 (every hour)
Version 1.18.0 - 2022-04-28
--------------------------------------------------------------
** New Feature
* Add pairing support (HmIP-SWDO-PL/HmIP-SWDO-PL-2)
* Add support for HmIP-SWDO-2
Version 1.16.10 - 20190227
--------------------------------------------------------------
** Bugfix
* [YOU_CTS_OPT_SMI_BN-52][HMIP_SWDO_I-20]Fixed a bug that caused setting of alarmworthy event flag with unidirectional or cyclic status frames.
** New Feature
* Added new device type for HmIP-SWDO-PL.
Version 1.16.8 - 20180302
--------------------------------------------------------------
** Related Hardware
* 1343958I / 1454161C
** Bugfix
* Fixed a bug with receiving answers of conditional switch commands.
* Also had to correct the counting of sequence counters if they are the same as the sequence counter of the status frame.
Version 1.16.6 - 20180221
--------------------------------------------------------------
** Modifications
* Changed counting of event_counter to new mechanism (boot:0; other:[1..252]).
* Reworked the mechanism of receiving answers.
Version 1.16.4 - 20180209
--------------------------------------------------------------
** Bugfix
* Added separate keypress counter for window and backup.
* All pending flags are now handled after boot process is finished. Otherwise it is possible to miss an acknowledgment frame of a frame at boot.
Version 1.16.2 - 20180207
--------------------------------------------------------------
** Bugfix
* Added first statusinfo to the backup mechanism.
Version 1.16.0 - 201802015
--------------------------------------------------------------
** Bugfix
* Added mechanism to prevent overwriting of a alarmworthy event with a not alarmworthy one.
* Fast window open and close now also causes a backup.
* Fixed a bug with missing MAC_ACKs after blinking.
** New Feature
* Added new parameter DISABLE_MSG_TO_AC.
* Added alarm-channel and depending functionality for security solution.
** Comments
* Excluded cyclic bidi statusinfo from backup mechanism.
* 'ifdef'-ed some unnecessary parts for contact sensors without optical detection.
Version 1.14.1 - 20170803
--------------------------------------------------------------
** Bugfix
* Fixed bug in sleep behaviour.
Version 1.14.0 - 20170315
--------------------------------------------------------------
** Bugfix
* Report link partner problem frame now includes the address of the link partner
* device turn of rx and go to sleep if status info to shc was ok but at least one link partner hasn't answered
** Modification
* add separate sequence counter for status infos
** Comments
* relevant changes in HMOS:
* Device is 5 seconds awake after sending a Multicast (AllDevices)
* Communication problems with burst receivers when sending multiple data packets one after the other
Version 1.12.2 - 20170208
--------------------------------------------------------------
** Comments
* Did a actualisation of the firmware converter. To be sure to be able to differentiate between the old and the new update file the version was increased.
Version 1.12.1 - 20160425
--------------------------------------------------------------
** Bugfix
* Fixed a bug with ACKs to config update request frames.
Version 1.12.0 - 20160413
--------------------------------------------------------------
** Comments
* Increased version due to change from SVN to GIT and to new library version.
--- END OF FILE ---