Homematic IP app
05-08-2022
De firmware van de Homematic IP draadloze drukknop met 2 knoppen is geüpdatet naar versie 1.18.0. Deze update bevat een bugfix voor de reset naar fabrieksinstellingen. Deze duurde te lang. Een nieuwe functie in deze update is de mogelijkheid om het alarm systeem te de-activeren, ook als het Homematic IP systeem niet online is of de Homematic IP cloud servers offline zijn. De changelog bevat alle informatie van de huidige en eerdere firmware updates. De update wordt spoedig beschikbaar via de Homematic IP app, voor gebruikers van het Homematic IP Access Point. Voor gebruikers van de CCU3 wordt de update zichtbaar via de Homepage van de WebUI.
Gerelateerd product:
C H A N G E L O G
-----------------
Please note: Only use the firmware file in connection with the current software-version of the CCUx!
Device: HMIP-WRC2 - Wall-mount Remote Control - 2-button
Company: eQ-3, Maiburger Str. 29, 26789 Leer, Germany
Version 1.18.0 2022-02-14
--------------------------------------------------------------
** Bugfix
* FactoryResetTiming to long
** New Feature
* Change of the bidirectional cyclical status transmission interval to extend the battery lifetime.
* Support of "Security Plus" - Disable active alarm system although the cloud is offline
** Improvement
* General improvements - Code optimisation
Version 1.16.2 - 2020-10-26
--------------------------------------------------------------
** Bugfix
* If AC is not responding on startup, the device is blocking until routing is done. A triggered switch command is sent after that but without optical feedback.
* Device is not waiting the ARR timeout after optical feedback (only devices with optical feedback at MAC level)
Version 1.16.0 - 2020-10-16
--------------------------------------------------------------
** New Feature
* add support for optical feedback after MAC-sending is done (all MAC-ACKs received or MAC-Ack failure)
Version 1.14.10 - 2020-07-09
--------------------------------------------------------------
** Bugfix
* USC with long keystroke is only sent after the key is released (if more Groups are activ)
* RemoteControl freeze after 2nd long keystroke on same channel ((same fix as for bug in the line before)
* Device sends further switch command after ReportLinkPartnerProblem was send
* STOP-Button retriggers SwitchCommand which was send before from other Channel (same fix as for bug in the line before)
Version 1.14.8 - 2020-07-02
--------------------------------------------------------------
** Bugfix
* If a burst partner is linked to channels > 6, a long keypress leads to a deadlock
* Device send USC to Linkpartner on long keystroke as long button is pressed
Version 1.14.6 - 2020-06-18
--------------------------------------------------------------
** Bugfix
* fixed wrong check of stop push button for
Version 1.14.4 - 09.06.2020
--------------------------------------------------------------
** Bugfix
* Device teststatus not longer set to 0 by default
Version 1.14.2 - 29.05.2020
--------------------------------------------------------------
** Bugfix
* Device sends switchCmd with long keystroke only on botton release to HmIP link partner
* If add a LP to Channel < 7, Linkpartner on channel > 6 will not work anymore
Version 1.14.0 - 08.05.2020
--------------------------------------------------------------
** Modification
* support for HmIP-HDRC
Version 1.12.4 - 29.11.2019
--------------------------------------------------------------
** Modification
* support for HmIP-WRCCR
Version 1.10.2/1.10.4 - 20.11.2020/24.11.2021
--------------------------------------------------------------
** Bugfix
* FactoryResetTiming to long
** New Feature
* Change of the cyclical transmission interval to extend the battery lifetime.
* Update HMOS to 1.40.0
Version 1.10.0 - 02.03.2018
--------------------------------------------------------------
** Bugfix
* Sendeverhalten bei langem Tastendruck fehlerhaft
* Fehler im Sendeverhalten, wenn Partner spät antworten
** New Feature
* HmIPW: Neuer Operation-Mode
* Zentralen basierte Lösungen und Lösungen ohne Zentrale (Installateur)
** Improvement
* Alarmbackup durchführen wenn Access Point/Zentrale ein NAK auf ein Unconditional Switch Command sendet
* update HMOS to V1.26.0
--- END OF FILE ---