De firmware van het Homematic IP Wired Access Point is geüpdatet naar versie 2.4.22. Deze update bevat een bugfix voor een probleem waarbij de bus in geheel niet opgestart werd na een reboot of power up van het Wired Access Point. De changelog bevat alle informatie van de huidige en eerdere firmware updates. De update wordt spoedig beschikbaar via de Homematic IP app. Voor gebruikers van de CCU3 wordt de update zichtbaar via de Homepage van de WebUI.
C H A N G E L O G
-----------------
Please note: Only use the firmware file in connection with the current software-version of the CCUx!
Device: HmIPW-DRAP - Homematic IP Wired Access Point
Company: eQ-3, Maiburger Str. 29, 26789 Leer, Germany
Version 2.4.22 - 2022-05-09
--------------------------------------------------------------
** Bugfix
* BUS is not switched on after Power UP
Version 2.4.20 - 2022-04-07
--------------------------------------------------------------
** Bugfix
* The DRAP will reboot if it does not receive a response to an Inclusion Accept.
Version 2.4.18 - 2022-03-29
--------------------------------------------------------------
** Bugfix
* The DRAP sends a route management frame with its own address marked as Unreachable.
* The display switches off and communication with the bus is disturbed.
Version 2.4.16 - 2022-01-26
--------------------------------------------------------------
** Bugfix
* The access points (HAP/DRAP) always send the Manufacturer Code 0x01 (EQ3) in the Inclusion Request, even with OEM variants.
** New Feature
* Forward backbone route management frames to the cloud server
Version 2.4.14 - 2021-08-16
--------------------------------------------------------------
** Bugfix
* Error flag Bus overload in StatusInfo is not reset
* Carrier sense always 0
* The DRAP tries to start a sequence number validation on all frames and takes the destination address of the receiving frame as the source address.
* HTTP client hangs if the previous connection was not closed.
* The access point interrupts the connection to the cloud server if the lookup server has delivered an incorrect URL.
* Sends to MulticastAllWiredDevices over Backbone with wrong CRRFD Address
* Error with updateURL not accessible.
* Websocket connection delay is only applied after restart.
* DRAP after firmwareupdate over CCU3 not reachable
* Full support for DEC Identify.
* DRAP power supply rated current exceeded: DRAP display goes off, nothing else happens.
* DRAP do not respond to IGMPv3 Membership Queries
** New Feature
* Request Route to device for Live OTAU support
** Improvement
* The web bootloader should prohibit a downgrade to a smaller major version.
* If a DRAP is operated with 2 separate strings, multicast frames are sent to bus 1 and bus 2 one after the other - this could also happen simultaneously.
Version 2.2.24 - 2020-12-16
--------------------------------------------------------------
** Bugfix
* Frames can no longer be sent. The stack remains in the busy state.
Version 2.2.16 - 2020-09-23
--------------------------------------------------------------
** Bugfix
* Download of update files will not start, if FIN,ACK from checkversion is not acked.
Version 2.2.12 - 2020-08-26
--------------------------------------------------------------
** Bugfix
* Multicast Readressing is also applied to INTERFACE_LOCAL/CLOUD
Version 2.2.10 - 2020-08-24
--------------------------------------------------------------
** Bugfix
* If the application is defective, an incorrect application version is reported to the update server.
Version 2.2.4 - 2020-08-07
--------------------------------------------------------------
** Bugfix
* The device-specific configuration can no longer be retrieved with Netfinder.
Version 2.2.2 - 2020-07-24
--------------------------------------------------------------
** Bugfix
* Wrong app sequence counter in status response frame.
* In loop mode, inclusion request frames are discarded in the coprocessor.
** Improvement
* Do not accept frames to AnyRouter if it is known that it is not routed.
Version 2.2.0 - 2020-07-16
--------------------------------------------------------------
** Bugfix
* With the custom lookup address, the path is not processed correctly.
** New Feature
* Advanced Routing
** Improvement
* change default update URL
* Block duplicate multicast frames when routing.
* Accept CCU SGTIN within Update Server URL
* Changing from switching to routing between the two buses of the DRAP
Version 2.0.28 - 2020-02-24
--------------------------------------------------------------
** Bugfix
* With the custom lookup address, the path is not processed correctly.
Version 2.0.26 - 2020-10-13
--------------------------------------------------------------
** Bugfix
* Download of update files will not start, if FIN,ACK from checkversion is not acked.
Version 2.0.22 - 2019-06-17
--------------------------------------------------------------
** Bugfix
* No communication between RF and wired components
Version 2.0.18 - 2019-04-08
--------------------------------------------------------------
** Bugfix
* DRAP lights up orange after update.
Version 2.0.16 - 2019-02-05
--------------------------------------------------------------
** Bugfix
* LED sequence for factory reset is to slow
* Wrong DHCP Vendor ID. DRAP reports as HAP
** New Feature
* OTAU multicast frames have to be routed
Version 2.0.12 - 2018-10-19
--------------------------------------------------------------
** Bugfix
* If the DRAP is configured as a router and it sends a validation request before it gets an IP address from the DHCP server, the DRAP restarts.
* sometimes the watchdog is triggered while Bus is powering up
Version 2.0.6 - 2018-08-27
--------------------------------------------------------------
** Improvement
* Only evaluate the HTTP response code, not the response phrase.
--- END OF FILE ---